Tarnation Kitchen Runner Rug

Here's a runner-sized variation on the Tarnation Rectangle Rug pattern.  It's a great size for a hallway, RV floor, or in front of the sink in your kitchen.  I like to use a runner long-ways in front of a back door or door into the garage, as a long walk-off mat.

The runner measures 75 inches long and 21 inches wide.  This rug used tarn made from 14 t-shirts in a variety of sizes (some very large, some small).

Here are the modifications to the original free pattern, to get a runner like this:

1. Chain 153 for the foundation or base chain.

2. Use standard single-crochet (U.S. terms).

For more variations on the Tarnation Rectangle Rug, see the following posts:
Carmel Macchiato Tarnation Rug
Drip-Dry Tarnation Rug
Plarnation Rectangle Rug

Tarnation Oval Rug

This fast and easy crocheted rug is made from t-shirts that have been cut into tarn (T-shirt yARN) -- a great way to recycle old cotton-knit garments and get a good-looking, high-use item in exchange. Your rug can be as large or small as you wish. The number of shirts to use depends on the sizes of the shirts and how large you want to make it. Machine washable and dryable, it's an excellent rug for kitchen, bath, utility, or entry.

Skill Level   Easy

Yarn
1/2" / 1cm-width tarn (not stretched) made from approximately 5-7 adult-sized t-shirts

Schematic diagram included.

A free .pdf of this pattern is available as a download from Ravelry.

download now

You can find tips and variations for this pattern in the following posts:
How to Make Tarn
Choosing Fabric for Tarn
Saving Your Hands and Arms When Using Tarn
Making the Print Show
Allover Print Tarn
Cottonation Oval Rug (made with cotton yarn)

And another Tarnation rug pattern
Tarnation Rectangle Rug

Tarn: Allover-Print Fabric Cutting

If you're making tarn (t-shirt yarn) from cotton-knit fabric with an allover print, then you'll need a special cutting technique, which will let the print show in your tarn. When tarn is cut “across the grain," or horizontally across the t-shirt, its edges curl upward and inward, so that the wrong side of the fabric is mostly visible in the tarn. When cut "with the grain," or vertically on the t-shirt, tarn’s edges curl downward and inward, so that the right side of the fabric is mostly visible.

With printed t-shirt fabric, you can use a zig-zag cut, consisting of vertical cuts that allow the tarn to curl so the print shows. It works especially well with rugs, like the Tarnation Rectangle Rug. This is not a perfect solution, because the corners don't curl. Also it is much more time-consuming than other cutting techniques. But the results are often worth it.

Here's how to do it:

1. Cut off the t-shirt hem, seams (if any), and top. Save the scraps for stuffing toys, etc.

2. Make a straight cut from the bottom up to 1/2" (1cm) from the upper edge.

3. At the top edge, move over 1/2" (1cm) and make a straight cut from the top down to 1/2" (1cm) from the lower edge.

4. At the bottom edge, move over 1/2" (1cm) and make a straight cut from the bottom up to 1/2" (1cm) from the upper edge

5. Repeat steps 3-4 until you run out of fabric. (see picture)

6. With your scissors, round off all of the corners.

7. Taper the ends if you'll be using the hand-stitch method of connecting your tarn strips. (see Step 7 in How to Make Tarn)

8. Trim the seams/sleeve hems/collar off the remaining t-shirt fabric, and repeat steps 2-7 for each piece. You don't have to start with a rectangular shape--just be sure your cuts are running generally "with the grain," and not across.

Tarn produced in this way will curl inward towards the wrong side of the fabric, leaving the print side showing. The curved corner flaps don't curl, and they will be worked in as you crochet or knit. Sometimes a flap will end up on the surface of your work, but since it has the same print as the surrounding stitches, it usually blends in--not noticeable if you're standing on a rug. You can see some flaps in the photo below. The gray and tan sections of the rug were made with printed tarn.

You can find more tips for the Tarnation Rectangle Rug  and Tarnation Oval Rug in the following posts:
How to Make Tarn
Choosing Fabric for Tarn
Saving Your Hands and Arms When Using Tarn
Making the Print Show
Mending a Tarn Rug

How to Make Tarn (T-Shirt Yarn)

Here's how I like to make tarn (T-shirt yARN) for the Tarnation Rectangle Rug and Tarnation Oval Rug patterns. It works great for me, and the 1/2" or 1 cm width makes it fairly easy on the hands and arms when working it up.

Just to know: When tarn is cut “across the grain," or horizontally across the t-shirt, its edges curl upward and inward, so that the wrong side of the fabric is mostly visible in the tarn. When cut "with the grain," or vertically on the t-shirt, tarn’s edges curl downward and inward, so that the right side of the fabric is mostly visible. The following steps will yield tarn that is primarily cut across the grain. If there is print on the right side of the shirt, it will not show. There are ways to get around this: turning out the print, and the zigzag cut.

1. Collect your t-shirts or other cotton-knit garments to be used. For best results, use items from the same manufacturer’s line. Variations in fabric content and thickness can make your project uneven. Sometimes that adds interest, but the finished product will not be as uniform, especially after washing. (For more info, see Choosing Shirts for a Tarn Rug.)

Tip: If your finished tarn item comes out of the dryer looking uneven, just give it a few yanks with your hands holding the row-ends, to straighten it up.

2. Cut the hem off the bottom of the t-shirt. If the shirt has side seams, cut all the seams off the front or back section. Save the scraps for stuffing toys, etc.

Tip: Turn the t-shirt inside-out before cutting the hem or seams off--it’s easier to see where to cut. Hold the hem or seam in your non-dominant hand while you cut with your dominant hand.

3. Cut diagonally into the hemless bottom of the shirt until you have a 1/2” (1cm)-wide strip started. This will give you a tapered end, for the needle-and-thread method of connecting strips in step 7. The ends are tapered to avoid tarn that is too bulky at the point of overlap.

Tip: Turn the t-shirt right-side-out and cut on the right side of the fabric--it’s easier to cut when the tarn edges are curling upward instead of downward where you can’t see. Also, hold the edge of the fabric (instead of the bunched-up shirt) in your non-dominant hand while cutting for better control of the fabric.

4. Tube Spiral - If the shirt does not have side seams, you can continue cutting the tarn strip, spiraling up to where the sleeves are attached. Taper-off the end, like the start of the strip.

Tip: When rolling your tarn into a ball, you can stretch the printed sections, to reduce the bulk and make them almost as flexible as the unprinted tarn. If you want the print to show on the outside of the tarn, turn it out while crocheting or knitting.

Note: If you have an allover-print t-shirt fabric, the tube spiral cut will completely hide the print. In order to make the print visible on the tarn, you must use a zigzag vertical cut technique.

5. Flat Spiral - If the shirt has side seams, continue cutting the tarn across the bottom, up the side, across the sleeve and collar edges, and down the other side. When you get to where you started, angle your cut upward so you can keep going in a flat spiral. Since tarn is stretchy, it’s forgiving at the corners, but you can round them off a little by trimming the points. Taper-off the width when you come to the end.

Note: Some tarn-makers stretch their tarn before rolling it into a ball. It makes the tarn more cord-like, but they only use tube-spiral cut tarn. This doesn’t work well with flat-spiral cut tarn--too many flappy corners and vertical cuts.

6. Cut the seams/collar/sleeve hems off any remaining shirt fabric, and cut more strips using the Flat Spiral method in step 5.

7. Connecting Strips - Overlap the tapered ends by about 1” (2.5cm). With a needle and thread, hand-sew 6-7 stitches straight up the middle. Backstitch works well for this.

Tip: Instead of tying off the sewing thread with a knot, you can take 3-4 tiny stitches at the end of the line of backstitches, to hold it in place.

Note: There are several other ways of connecting tarn, including tying a knot, sewing a diagonal seam, and cutting a slit and threading through. Your choice depends on what kind of item you’re making and how smooth the connections need to be. The method in step 7 provides a smooth connection that takes less time than the diagonal seam method.


WARNING: Don’t cut tarn across the shirt seams. The seam stitches will not hold your tarn together, especially in the wash.

-----
You can find more tips for the Tarnation Rectangle Rug and Tarnation Oval Rug patterns in the following posts:
Saving Your Hands and Arms when Making and Using Tarn
Choosing Shirts for a Tarn Rug
Making the Print Show
Allover Print Tarn
Mending a Tarn Rug

Avoiding the Owie with Tarn

Cutting and working with tarn (T-shirt yARN) can be painful. Here are some tips for minimizing the owie, which you can use with the Tarnation Rectangle Rug and Tarnation Oval Rug patterns.

1. Don't get too carried away with cutting the tarn, or your hand will start to hurt. It’s best to break it up into short time periods. I like to cut a shirt or section of a shirt, crochet (or knit) it into the project, and then cut more.

2. Use nice, sharp scissors for cutting tarn. As for sewing, you might want to get a brand new pair, and designate it for tarn cutting only. Scissors used for cutting paper quickly become too dull for fabric cutting, and tarn is a stretchy, thickish fabric, so you need all the help you can get. There have been reports of tarn-cutting wreaking havoc on good sewing scissors, so an inexpensive, new pair of sharp scissors for your tarn is a good idea.

3. Stick with crochet. I love knitting, but for tarn, knitting causes the strands to “grab” the needles, causing a lot of pushing and pulling to get each stitch made. Crochet can be done loosely enough to minimize the grabbiness.

4. Work a bit more loosely than you would with regular yarn. The harder you have to pull to get the stitches made, the sooner your arms, neck, and shoulder will start to hurt.

5. Take lots of breaks. Stop and shake out your hands and arms, stand up and stretch, whatever you need to do to keep the muscles relaxed and the blood circulating. Also, longer breaks give your hands and arms some recovery time.

6. Cut your tarn thin, but not too thin. Anything wider than 1/2” will be hard on your hands and arms, but thinner than that, the fabric can sometimes unravel and break when pulled hard.


You can find more crochet tips for the Tarnation Rectangle Rug and Tarnation Oval Rug patterns in the following posts:
Choosing Shirts for a Tarn Rug
How to Make Tarn
Making the Print Show
Allover Print Tarn
Mending a Tarn Rug

Tarnation Rectangle Rug

This easy-to-make crocheted rug is made from t-shirts that have been cut into tarn (T-shirt yARN) — a great way to recycle old cotton-knit garments and get a good-looking, high-use item in exchange. Machine washable and dryable, it’s an excellent rug for kitchen, bath, utility, or entry.

U.S. crochet terms

Skill Level Easy

Yarn 1/2”/1cm-width tarn made from 5-10 adult-sized t-shirts (Instructions for making tarn are included in the pattern.)

Schematic diagram included.

For a free .pdf of this pattern, click here:

download now
You can find tips and variations for this pattern in the following posts:
How to Make Tarn
Choosing Fabric for Tarn
Saving Your Hands and Arms When Using Tarn
Making the Print Show
Allover Print Tarn
Mending a Tarn Rug
Carmel Macchiato Tarnation Rug
Drip-Dry Tarnation Rug
Plarnation Rectangle Rug
Tarnation Kitchen Runner Rug

And another tarnation rug pattern
Tarnation Oval Rug

WIP Wednesday: Turned Tarn Rug

This rug is still a work-in-progress. I'm now far enough along to realize that if I use all of my shirts in this fabric for this rug, it will come out square, and I prefer rectangular rugs. So I turned it (conceptually) 90 degrees, and I'll add maybe 1-1/2 more shirts: the rest of the white, plus a navy blue shirt. Then I'll have 4 more shirts left to make a little oval rug out of: pink, red, gray, white. Okay, I can live with that.

You can download a free pattern for this rug from here:
Tarnation Rectangle Rug.

For more WIP Wednesday posts on other blogs, check here.

Evolution of a Rug

Check out my grandmother's hand-hewn crochet hook, upper left.
It's Work-In-Progress Wednesday, and I'm back! In December, we bought a new house in a new town, and I have been up to my eyeballs in boxes, packing materials, and stuff. For the last few months, my time has been mostly spent unpacking and selling-off zillions of items from three households (mine, my husband's, and a friend who passed away).

We have a very old cat--adopted him from our departed friend. He is becoming incontinent, and he usually makes it to the vicinity of the catbox, but... well... let's just say the floor of the utility room is getting cleaned A LOT. I put my little t-shirt yarn rug there, and it's working well because it's so easy to wash. It grabs and holds the puddles instead of having the grout lines become little yellow rivers. So I desperately need a second tarn (t-shirt yarn) rug, to switch out with during the laundering process.

This one is made of a bunch of old turtlenecks of mine. I had a collection of many colors, all in the same style and fabric. They are out of style now, and I have others that I like way better, so it's time to crochet a rug!

For more WIP Wednesday posts on other blogs, check here.

UPDATE: Since instructions for this rug have been requested, I'm going to try to tell you how I made this... haven't created a pattern yet... maybe a free one someday soon.

ANOTHER UPDATE: The pattern has now been produced and tested, and it's available as a free download. Tarnation Rectangle Rug

T-Shirt Yarn Market Bag

Here's another way to crochet a bag out of recycled yarn-type stuff. This is The Ultimate Recycled Market Bag pattern, made with 1/2" (1 cm) wide strips of cut-up t-shirt fabric. I hand-stitch the ends of the strips together to form a continuous ball of tarn (T-shirt yARN). The only modification necessary for the pattern, is to use a US size P (15 mm) crochet hook.

It works up as a heavy, sturdy bag.



You can find more crochet tips and variations for The Ultimate Recycled Market Bag in the following posts:
How to Make Tarn
How to Make Plarn
Saving Your Hands and Arms When Using Plarn
Cotton Yarn Market Bag
My Old Crochet Hook